Abit SG-80DC Manual do Utilizador

Introduction Hardware Setup BIOS Setup Driver & Utility Appendix SG-80DC Motherboard Intel Pentium 4 Socket 775 Installation Instruction

To install this motherboard: 1. Locate all the screw holes onthe motherboard and the chassis base. 2. Place all the studs or spacersneeded on the c

Hardware Setup SG-80DC 2-3 2.3.1 CMOS Memory Clearing Header and Backup Battery The time to clear the CMOS memory occurs when (a) the CMOS data beco

CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power so

Hardware Setup SG-80DC 2-5 2.4 Connecting Chassis Components 2.4.1 ATX Power Connectors These connectors provide the connection from an ATX power su

2.4.3 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch

Hardware Setup SG-80DC 2-7 2.5 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny sur

4. Visually inspect if the CPU is seated well into the socket. The alignment key must be located in the notch of package. 5. Use your left hand to

Hardware Setup SG-80DC 2-9 8. Place the heatsink and fan assembly onto the socket. Align the four fasteners toward the four mounting holes on the m

2.5.2 DDR Memory Slots This motherboard provides two 184-pin DDR DIMM slots for un-buffered and non-ECC modules, memory size expansible up to 2GB (DD

Hardware Setup SG-80DC 2-11 2.5.3 Floppy and IDE Disk Drive Connectors The FDD connector connects up to two floppy drives with a 34-wire, 2-con

Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of

2.5.4 Serial ATA Connectors Each SATA connector serves as one single channel to connect one SATA device by a thin SATA cable. The disk array for RAID

Hardware Setup SG-80DC 2-13 2.5.5 Accelerated Graphics Port Slot This slot supports an optional AGP graphics card up to AGP 8X/4X mode. ※ This moth

2.6 Connecting Optional Devices 2.6.1 Additional USB 2.0 Port Headers Besides the 4x USB 2.0 ports located at rear I/O part, this motherboard also fe

Hardware Setup SG-80DC 2-15 2.6.3 Front Panel Audio Connection Header This header provides the connection to audio connector at front panel. • To u

2.7 Connecting I/O Devices The rear I/O part of this motherboard provides the following I/O ports: • Mouse: PS/2 mouse connector. • Keyboard: PS/2

BIOS Setup SG-80DC 3-1 3. BIOS Setup This motherboard provides a programmable EEPROM that you can update the BIOS utility. The BIOS (Basic Input/Out

3-2 SG-80DC

Driver & Utility SG-80DC 4-1 4. Driver & Utility The “Driver & Utility CD” that came packed with this motherboard contains drivers, util

4-2 SG-80DC

Appendix SG-80DC 5-1 5. Appendix 5.1 Troubleshooting (How to Get Technical Support?) 5.1.1 Q & A Q: Do I need to clear the CMOS before I use a

Introduction Contents 1. Introduction... 1-1 Hardware Setup BIOS Setup Driver &

 Upgrade the motherboard’s latest BIOS version.  Upgrade the add-on device’s latest driver version.  Check if there is any conflict in the “Contro

Appendix SG-80DC 5-3 5.1.2 Technical Support Form Country: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Mem

Rev. 1.00 ABIT Computer Corporation http://www.abit.com.tw

3. BIOS Setup... 3-1 4. Driver & Utility ...

Introduction 1. Introduction 1.1 Features & Specifications CPU • LGA775 Socket for Intel® Pentium D/ Pentium 4/ Celeron Processors with 800/533

• 1x PS/2 Keyboard connector • 1x Serial Port • 1x Parallel Port • 1x VGA connector • 4x USB 2.0 connectors • 1x RJ-45 LAN Connector • 1x Audi

Introduction 1.2 Motherboard Layout SG-80DC 1-3

1-4 SG-80DC

Hardware Setup SG-80DC 2-1 2. Hardware Setup In this chapter we will elaborate all the information you need upon installing this motherboard to your