Abit AN9 32X Manual do Utilizador

Introduction Motherboard AMD Socket AM2 User’s Manual Hardware Setup BIOS Setup Driver & Utility CD Appendix For more information: www.ab

For more information: www.abit.com.tw 1-6

Hardware Setup 2. Hardware Setup In this chapter we will elaborate all the information you need upon installing this motherboard to your computer sys

To install this motherboard: 1. Locate all the screw holes onthe motherboard and the chassis base. 2. Place all the studs or spacersneeded on the c

Hardware Setup 2.3.1 CMOS Memory Clearing Header and Backup Battery The time to clear the CMOS memory occurs when (a) the CMOS data becomes corrupted

CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power so

Hardware Setup 2.3.2 Wake-up Headers These headers use a jumper cap to enable/disable the wake-up function. • PS2-PWR1: Pin 1-2 shorted (Defa

2.4 Connecting Chassis Components 2.4.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the

Hardware Setup 2.4.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis fron

2.4.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. • CPUFAN1: CPU Fan Power Connector •

Hardware Setup 2.5 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount co

User’s Manual English, 1st Edition May, 2006 Copyright and Warranty Notice The information in this document is subject to change without notic

4. Place the heatsink and fan assembly onto the retention frame. Match the heatsink clip with the socket mounting-lug. Hook the spring clip to the m

Hardware Setup 2.5.2 DDR2 Memory Slots This motherboard provides four 240-pin DIMM slots for Dual Channel DDR2 800 memory modules with memory expansi

To install system memory: 1. Power off the computer and unplug the AC power cord before installing or removing memory modules. 2. Locate the DIMM s

Hardware Setup 2.5.3 PCI Express X16 Add-on Slots (Install Graphics Card) These slots support the connections of graphics cards that comply with PCI

To install two SLI-ready graphics cards under SLI Mode, you will need to: • Prepare two identical NVIDIA certified, SLI-ready PCI Express x16 graphi

Hardware Setup 4. To install together with the SLI supporting bracket, unscrew the central hole of the I/O panel, insert the SLI supporting bracket,

2.5.4 AudioMAX Connection Slot This slot provides the audio input/output connection over the rear I/O part through an add-on daughter-card. Find your

Hardware Setup • FP-AUDIO1: This header provides the connection to audio connector at front panel. This header provides the front panel connection f

3. Click “Disabled front panel jack detection”, and then click “OK” to confirm. S/PDIF Connection: In the motherboard package you can find one audi

Hardware Setup 2.6 Connecting Peripheral Devices 2.6.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives

Introduction Contents 1. Introduction... 1-1 Hardware Setup BIOS Setup Driver &

2.6.2 Serial ATA Connectors Each SATA connector serves as one single channel to connect one SATA device by a thin SATA cable. The RAID 0/1/0+1/5/JBOD

Hardware Setup 2.6.3 Additional USB 2.0 Port Headers Besides the 4x USB 2.0 ports located at rear I/O part, this motherboard also features 3x more US

2.6.4 Additional IEEE1394 Port Headers Each header supports 1x additional IEEE1394 port by connecting bracket or cable to the rear I/O panel or the f

Hardware Setup 2.6.5 PCI Express X1 Add-on Slots These slots provide the connection of add-on cards that comply with PCI Express specifications.

2.6.7 GURU Panel Connection Header This header is reserved for connecting ABIT’s exclusive GURU Panel. For more information, please refer to the incl

Hardware Setup 2.7 Onboard Status Display 2.7.1 POST Code Displayer This is an LED device to display the “POST” Code, the acronym of Power On Self

2.7.2 Power Source Indicators These indicators work as a reminding device to display the power status of this motherboard with power source connected

Hardware Setup 2.8 Connecting I/O Devices • OTES GT™: This exclusive technology is served to cool the motherboard's heat-source by the cool-as

For more information: www.abit.com.tw 2-28

BIOS Setup 3. BIOS Setup This motherboard provides a programmable EEPROM that you can update the BIOS utility. The BIOS (Basic Input/Output System) i

3.2 Standard CMOS Features...3-3 3.3 Advanced BIOS Features ...

3.1 µGuru™ Utility There are two setup menus in this µGuru utility. You may switch between these two by clicking the left or right arrow key on keybo

BIOS Setup 3.2 Standard CMOS Features This option configures the time, date, and hard disk type, etc. 3.3 Advanced BIOS Features This option configu

3.4 Advanced Chipset Features This option configures the DRAM timing. 3.5 Integrated Peripherals This option configures onboard device control. 3-4

BIOS Setup 3.6 Power Management Setup This option configures the power management. 3.7 PnP/PCI Configurations This option configures the IRQ setting

3.8 Load Fail-Safe Defaults This option loads the BIOS default values for the most stable, minimal-performance system operations. 3.9 Load Optimized

Driver & Utility CD 4. Driver & Utility CD The “Driver & Utility CD” that came packed with this motherboard contains drivers, utilities a

For more information: www.abit.com.tw 4-2

Appendix 5. Appendix 5.1 POST Code Definitions 5.1.1 AWARD POST Code Definitions POST (hex) Description CF Test CMOS R/W functionality C0 Early chip

25 Early PCI Initialization: -Enumerate PCI bus number. -Assign memory & I/O resource -Search for a valid VGA device & VGA BIOS, and put it i

Appendix 6B Program chipset registers according to items described in Setup & Auto-configuration table 6D 1. Assign resources to all ISA PnP dev

Introduction 1. Introduction 1.1 Fatal1ty FATAL1TY STORY Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually

5.1.2 AC2005 POST Code Definitions POST (hex) Description Power On Sequence 8.1. Start power on sequence 8.2. Enable ATX power supply 8.3. ATX pow

Appendix 5.2 Troubleshooting (How to Get Technical Support?) 5.2.1 Q & A Q: Do I need to clear the CMOS before I use a new motherboard to assemb

Q: How to get a quick response for my request on technical support? A: Please carry out a simple troubleshooting before sending “Technical Support

Appendix • Memory size: Type in the size of your memory module. Example: 512M* 4PCS • Memory configuration: Type in the memory configuration in BIO

5.2.2 Technical Support Form 5-8 Country: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory

Appendix 5.2.3 UNIVERSAL ABIT Contact Information Taiwan Head Office UNIVERSAL ABIT Co. Ltd. No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel:

P/N: 4310-0000-20 Rev. 1.00 www.abit.com.tw Johnathan “Fatal1ty” Wendel

LIVIN’ LARGE Since my first big tournament wins, I have been a “Professional Cyberathlete”, traveling the world and livin’ large with lots of Interna

Introduction 1.2 Features & Specifications CPU • Supports Socket 940 AM2 Processor with 2GHz system bus using Hyper-Transport™ Technology • Sup

• 2x IEEE1394a headers Rear Panel I/O • OTES GT™ • 1x PS/2 Keyboard connector • 1x PS/2 Mouse connector • 2x RJ-45 Gigabit LAN ports • 4x USB 2

Introduction 1.3 Motherboard Layout 1-5