Abit TX5 Guia do Utilizador descarregar pdf (Página 102)

6 Troubleshooting and Servicing

Error messages

Error message Description Action

Internal Error:

Invalid

parameter

The scanner parameters are

inconsistent.

Please restart scanner. If the problem still occurs after

restart, contact Trimble Support.

Distance

measurement

tolerance

exceeded

The white reference area on the

scanner‘s base gave inconsistent

measurements.

Please check cleanliness of this reference area, mirror,

and lenses.

WLAN error The WLAN device could not be

found.

Please restart scanner. If the problem still occurs after

restart, contact Trimble Support.

Color aquisition

failure

Color aquisition has stopped

unexpectedly. Probably color

aquisition is not complete.

Please save log file and contact Trimble Support.

Out of time

failure

This indicates an internal scanner

error.

Please restart scanner. If the problem still occurs after

restart, contact Trimble Support.

Module Status

Error

Module Status Error: Data

version mismatch.

Internal scanner communication problem. Please ask

Trimble Support for a firmware upgrade.

Scanner

Operation

Failure

Internal scanner error. Please restart scanner. If the problem still occurs after

restart, contact Trimble Support.

Command not

executed

Command could not be executed

because of a previous running

scan operation. A scan is still

active, you cannot start the next

operation now.

Wait until the scan has been finished.

Scanner

temperature

too low

Temperature of the scanner is

too low. Scanning is not possible.

Please warm up the scanner before further use.

Temperature

too high

Temperature of the scanner is

too high. Scanning is not possible.

Please shut down the scanner and let it cool down or

check if the fan is running. If not enable fan cooling

under

Manage

Sensors

Temperature

Internal

memory full

The internal scanner hard drive is

full.

Please try to free some space by deleting wallpapers,

operators, projects or profiles or by clearing the log

file. If that does not help, please contact Trimble

Support.

Possible file

system

corruption on

SD card

detected. Do

you want the

The scanner has detected file

system corruptions on the

inserted SD card. Damages to the

file system may occur when you

remove the SD card from your

computer without using the

It is recommended to let the scanner repair the SD

card. Please note that repairing might delete

erroneous files from the SD card. If you see this error

message again and again, you should consider

replacing the SD card. To prevent damages to the file

system when removing the SD card from your

Trimble TX5 3D Laser Scanner User Guide 102

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 124 125

Comentários a estes Manuais

Sem comentários

Abit TX5 Guia do Utilizador Página 102

Comentários a estes Manuais

Manuais e produtos relacionados com Placas-mãe Abit TX5