Abit TX5 Guia do Utilizador descarregar pdf (Página 21)

2 Safety Precautions and Maintenance

Mechanical security

The laser scanner may only be used when set on a flat and stable surface. Severe injuries may result

if the laser scanner overturns. Only use equipment recommended by Trimble and follow the setup

instructions in this manual or in the manual of the manufacturer of the equipment.

If using a cart, move the setup with special care. Never move the cart by pulling at the power cables.

Pushing or pulling of the cart with too much force, sudden stops, or an uneven surface can cause an

upset of the laser scanner.

The laser scanner will rotate clockwise up to 360 degrees when performing a scan. Ensure that the

case of the laser scanner can rotate freely and will not hit any objects during the scan.

The mirror unit rotates with high speed while scanning and for a short period after the scan. Do not

touch the rotating mirror unit with your hands or any objects at the risk of personal injury and

damage to the laser scanner.

Transport

When carrying the laser scanner, take care not to drop it. Strong impact may damage the laser

scanner and render it incapable of proper operation. Carry the laser scanner separately from its

equipment or – for best protection – use the original transport case.

When shipping and transporting the laser scanner by rail, sea, air, or in a road vehicle, make sure to

use its original transport case and a suitable outer cardboard box for best protection against shock

and vibration.

The PowerBlock batteries are Li-Ion batteries and are thus classified as "dangerous goods". When

transporting or shipping the PowerBlock batteries, please ensure that you observe the applicable

and international rules and regulations. For further information, please contact your local forwarder

before transportation or shipping.

For Li-Ion batteries with less than 100 Wh energy content, an exemption is provided that allows you

to carry such a battery without further paperwork. The maximum Li-Ion battery energy a single

person may carry is 200 Wh.

Note – Make sure that the total energy content of all Li-Ion batteries that you (as a single person)

carry is less than 200 Wh and that no single battery has more than 100 Wh energy content.

Note – The laser scanner must be turned off during transportation or shipping in a transport case.

Remove the battery from the laser scanner before shipping.

Storage

Prior to storing the laser scanner for a longer time, remove the battery. Pack the scanner and the

battery in its shipping case to protect it from environmental hazards, dust, and dirt. Store all

components in an environment where the humidity level is low, the temperature is relatively stable,

and where they will not be subject to extreme temperatures, environmental conditions, or heavy

vibrations.

Trimble TX5 3D Laser Scanner User Guide 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 124 125

Sem comentários

Abit TX5 Guia do Utilizador Página 21