Abit TX5 Guia do Utilizador descarregar pdf (Página 22)

2 Safety Precautions and Maintenance

Maintenance

General

It is recommended that you check your laser scanner at least once a month. This enables you to

spot trouble before it starts and helps provide you with an efficient measuring system.

The laser scanner is a precision instrument that contains many sensitive components, and it must

be handled with care. Follow these procedures to prevent problems with your system:

Check the cables for damage to outside insulation, connectors, and pins.

Check the housing of the scanner for damage.

Check the housing and the connectors of the battery for damage.

Place a dust cover over the laser scanner when it is not in use.

Do not lubricate the laser scanner.

To ensure proper functioning of the laser scanner, it should be regularly checked and certified by a

Trimble service provider. The service intervals should not exceed a maximum period of one year. For

more information, contact your Trimble dealer.

Cleaning instructions for optics

Note – To avoid unnecessary damage or wear, only clean the optics when the degree of

contamination has an impact on the scan quality (e.g. an increase in range noise or a decrease in

scan range) and requires cleaning for proper function.

Major contamination and improper handling to clean optics may impact the scanning quality. Self-

caused damages can result in a complete replacement of the part at the expense of the

customer.

We recommend using latex gloves. If you are suffering from latex allergies please use gloves

that are suitable for you. Lightly rub the gloves after taking them off with laboratory cloths and

isopropanol to remove grease and dirt.

Do not touch the optical surfaces with bare hands or laboratory gloves if at all possible.

Turn the scanner off before cleaning the optics.

Note – Before cleaning the mirror optics, cover the lens with a cap and avoid any contact with

the lens.

Only use cleaning fluid WITHOUT alcohol or acetone to clean the optics. We recommend

alcohol-free lens cleaner that can be found in most optical supply stores.

In the event acetone accidentally comes in contact with the mirror or lens, IMMEDIATELY rinse

with water (distilled, if possible).

Trimble TX5 3D Laser Scanner User Guide 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 124 125

Sem comentários

Abit TX5 Guia do Utilizador Página 22